Product catalogue
24 out of 30 results
Filters
24 out of 30 results
Adapter Plate AP 46 HCP
1 Variant
Interface element to enable the connection of a Cantilever Bracket AK 46 or a WBD 46 to steel beams with beam flange widths of 80 to 120 mm.
Assembly Group BG MPK 46 HCP
4 Variants
Bi-directional Slide Set KGL 46 HCP
2 Variants
Block PBH 46 HCP
6 Variants
Twin Holder plates ensure a constant centre-to-centre distance between the flow and return pipes during installation.
Blockset PBS 46 HCP
6 Variants
Quick assembly system for attaching pipe clamps and other components to the siMetrix Profile PRO 46. It is self-retaining thanks to the shape, but can still be easily moved by hand. Easy height adjustment due to 10 mm spaced grooves which allow easy shortening with the Rod Cutter PBC without sawing or re-cutting threads.
Cantilever Bracket AK 46-P HCP
5 Variants
Prefabricated single-arm cantilever installations to wall or other on-site structures.
Cantilever Bracket AK CC 46-P HCP
5 Variants
Prefabricated single-arm cantilevers for the PRO 46 profile.
Channel Adapter SA PRO 46 HCP
2 Variants
For integrating lighter constructions within the siMetrix system. Enables the profile transition from the siMetrix Profile PRO 46 to the Pressix CC 41 and 27 channel systems.
Connector CN 46 HCP
1 Variant
For creating crossbars or cantilevers on the Profile PRO 46.
End Cap ADK 46
1 Variant
To be used for safely and neatly covering the ends of Profiles PRO 46.
End Support WBD 46 HCP
1 Variant
In combination with Profile PRO 46, End Support WBD 46 is particularly suitable for: brackets for wall, floor and ceiling mounting free standing frame constructions. The HCP design allows for use in areas with higher corrosion protection requirements.
Hexagon Drilling Screw SKB 46
1 Variant
Insulated Foot Plate SHB SQF 46
2 Variants
Integrated foot plate made of synthetic rubber. Providing a non-penetrative supporting base for low level siMetrix 46 structures. Suitable for equipment, pipes, ventilation ducts or walkways.
Lateral Brace CFB 46 HCP
1 Variant
Profile Adapter MPA F
2 Variants
For integrating lighter constructions within the siFramo modular secondary steel system. Enables the profile transition from the siFramo Beam Section TP F 80 or 100 to the siMetrix Profile PRO 46.
Profile Clip MPK 46 HCP
4 Variants
With the Profile Clip MPK 46, threaded rods can be connected to the side of the Profile PRO 46 in a stepless manner. The height adjustment of the pipe clamp is also not limited. Due to the small installation footprint and offset lateral profile mounting, the clamp ears can be positioned to overlap one another.
Profile Coupling PK 46 HCP
1 Variant
Internal connecting element for joining two Profiles PRO 46. Particularly suitbale for vertical extension. Should the component be used for horizontal application, the maximum permissible bending moment at the connection point must be observed.
Profile Holder MPH F 80- 46 HCP
1 Variant
Implementation of a cross-connection between the siFramo TP F 80 and the siMetrix PRO 46 profile.
Profile Holder MPH F100- 46 HCP
1 Variant
Implementation of a cross-connection between the siFramo TP F 100 and the siMetrix PRO 46 profile.
Profile Holder MPH MS 41- 46 HCP
1 Variant
Implementation of a cross-connection between the Sikla Channel with a rail width of 41 mm and the siMetrix PRO 46 profile.
Profile Holder MPH PRO 46 W HCP
1 Variant
Element for direct structural connection of the siMetrix PRO 46 profile.
Profile Holder MPH PRO 46- 41 HCP
1 Variant
Implementation of a cross-connection between the siMetrix PRO 46 profile and the Sikla Channel with a rail width of 41 mm.
Profile Holder MPH PRO 46- 46 HCP
1 Variant
Implementation of a cross-connection between the siMetrix PRO 46 profile and another siMetrix PRO 46 profile.
Profile Lining SAL 46
2 Variants
Sound absorption lining for inserting into Profiles PRO 46. Mainly for use in ducting systems, also for sound proof installations as per DIN 4109.