PBH 46 1/2''

PBH 46 M6 - M10

PBH 46 M12

PBH 46 M16

Block PBH 46 HCP

Group: B114

Quick assembly system for attaching pipe clamps and components to the siMetrix Profile PRO 46

Self-retaining thanks to the shape, yet easily movable by hand

Compatible with Pressix Rods PNS, threaded rods and other connecting elements

Select a Type

Overview of Types
General Information
Installation

Overview of Types

General Information

Twin Holder plates ensure a constant centre-to-centre distance between the flow and return pipes during installation.

Certification

This product has been awarded the RAL quality mark "Pipe Supports" and is subject to continuous external monitoring according to RAL GZ-655.

Technical specifications

Material base body	steel
Surface	HCP
Corossion class	C4

Load range

Type	-V_X,perm.	V_X,perm.	-V_Y,perm.	V_Y,perm.	-V_Z,perm.	V_Z,perm.
PBH 46 M 6 HCP	0,54 kN	0,54 kN	2,54 kN	2,54 kN	4,52 kN	4,52 kN
PBH 46 M 8 HCP	0,54 kN	0,54 kN	2,54 kN	2,54 kN	4,52 kN	4,52 kN
PBH 46 M10 HCP	0,54 kN	0,54 kN	2,54 kN	2,54 kN	4,52 kN	4,52 kN
PBH 46 M12 HCP	0,54 kN	0,54 kN	2,54 kN	2,54 kN	4,52 kN	4,52 kN
PBH 46 M16 HCP	0,54 kN	0,54 kN	2,54 kN	2,54 kN	4,52 kN	4,52 kN
PBH 46 1/2'' HCP	0,54 kN	0,54 kN	2,54 kN	2,54 kN	4,52 kN	4,52 kN

Type	-M_X,perm.	M_X,perm.	-M_Y,perm.	M_Y,perm.
PBH 46 M 6 HCP	0,04 kNm	0,04 kNm	0,05 kNm	0,05 kNm
PBH 46 M 8 HCP	0,04 kNm	0,04 kNm	0,05 kNm	0,05 kNm
PBH 46 M10 HCP	0,04 kNm	0,04 kNm	0,05 kNm	0,05 kNm
PBH 46 M12 HCP	0,04 kNm	0,04 kNm	0,05 kNm	0,05 kNm
PBH 46 M16 HCP	0,04 kNm	0,04 kNm	0,05 kNm	0,05 kNm
PBH 46 1/2'' HCP	0,04 kNm	0,04 kNm	0,05 kNm	0,05 kNm

Following loads direction not RAL-tested: V(X), V(y), M(x) und M(y)

Software

This product is available in the following software.

Installation

Snap the block onto the profile, then tighten the connecting element with a lock nut. To disassemble, loosen the lock nut and press on the shoulder (highest point) of the block upper part and pull it off the profile.

Tightening torque: 15 Nm