Speed Nut NT CC41-M 6 A4
Group: 1714
Part number 199299
Particularly useful for installation in vertical channels or where access is difficult
Can be used in all stainless steel Sikla Channels of 27 mm width, independent of the channel's height
No obstruction on bolt heads when sliding in and no settlement after tightening
Technical Data
Mi1 | M6 |
Channel Nut and Spring are tightely connected.
Load range
VX,perm. | 0,90 kN |
-VZ,perm. | 3,20 kN |
The permissible load capacities of the channels are to be respected.
Technical specifications
Material base body | Stainless Steel A4 |
Material connecting element | Spring steel, stainless |
Corossion class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
Certification
Installation
After inserting the Speed Nut into the channel opening, it is - by exerting slight pressure on it - turned to the right as far as it will go; deinstallation may be effected by following the instructions in reverse order.
Installation and deinstallation do not require tools and may be repeated several times.
| M6 | M8 | M10 | |
|---|---|---|---|
| Tightening torque [Nm] | 10 | 25 | 40 |