Speed Nut NT CC41 A4
Group: 1714
Particularly useful for installation in vertical channels or where access is difficult
Can be used in all stainless steel Sikla Channels of 27 mm width, independent of the channel's height
No obstruction on bolt heads when sliding in and no settlement after tightening
Overview of Types
General Information
In particular useful for installation in vertical channels or where access is difficult. Further advantages: Can be used in all stainless steel Sikla Channels of 27mm width, independent of the channel's height. No getting stuck on bolt heads when sliding in the channel. No appearance of settlement after tightening.
Certification
Technical specifications
Material base body | Stainless Steel A4 |
Material connecting element | Spring steel, stainless |
Corossion class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
Load range
Type | VX,perm. | -VZ,perm. |
NT CC41-M 6 A4 | 0,90 kN | 3,20 kN |
NT CC41-M 8 A4 | 2,10 kN | 5,80 kN |
NT CC41-M10 A4 | 3,40 kN | 5,80 kN |
The permissible load capacities of the channels are to be respected.
Software
This product is available in the following software.
Installation
After inserting the Speed Nut into the channel opening, it is - by exerting slight pressure on it - turned to the right as far as it will go; deinstallation may be effected by following the instructions in reverse order.
Installation and deinstallation do not require tools and may be repeated several times.
| M6 | M8 | M10 | |
|---|---|---|---|
| Tightening torque [Nm] | 10 | 25 | 40 |