Type M10
Roof Hanger TRH M10
Group: 1428
Part number 125806
Mounting of pipes with low loads (DN 50) to trapezoidal sheet metal ceilings
For heavier loads, distribute evenly across several holders, e.g. using a crossbeam.
Technical Data
B1 | 90 mm |
B2 | 26 mm |
b1 | 25 mm |
d | 9.5 mm |
d1 | 4 mm |
H | 90 mm |
H1 | 15 mm |
Mi1 | M10 |
t | 2.5 mm |
Completely pre-assembled (see drawings); with riveted nuts.
Load range
-VZ,perm. | 0,80 kN |
Note: Working load per fixing point. The carrying capacity of the trapezoidal corrugated sheet may restrict the application.
Technical specifications
Material base body | steel |
Surface | pre-galavanised |
Corossion class | C2 |
Certification
Type M8 (125693) and M10 (125806) for Sprinkler Systems according to VdS Standards: G4820032 and Type M10 for Sprinkler Systems according to FM ≤ 3.
Installation
For drilling trapezoidal corrugated sheets, we recommend to use the Piercing Tool LOT 3; for fixing, we recommend a M8x100 (Part No. 138608) cross bolt.
Note: Each through bolt is to be secured by means of a locking nut; the same applies to dynamic loads.
Blind steel rivets or sheet metal screws may not be used in Sprinkler Systems.
Documents
- VdS Approval - Sikla Roof Hanger - G4820032
PDF (0.29MB)