Type RM 10
Roof Hanger TRH RM 8
Group: 1428
Part number 125675
Mounting of pipes with low loads (DN 50) to trapezoidal sheet metal ceilings
For heavier loads, distribute evenly across several holders, e.g. using a crossbeam.
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Type RM 10
Group: 1428
Part number 125675
Mounting of pipes with low loads (DN 50) to trapezoidal sheet metal ceilings
For heavier loads, distribute evenly across several holders, e.g. using a crossbeam.
B1 | 90 mm |
B2 | 26 mm |
b1 | 25 mm |
d | 9.5 mm |
d1 | 4 mm |
H | 90 mm |
H1 | 15 mm |
Mi1 | M8 |
t | 2.5 mm |
Completely pre-assembled (see drawings).
-VZ,perm. | 0,80 kN |
Note: Working load per fixing point. The carrying capacity of the trapezoidal corrugated sheet may restrict the application.
Primary element material | steel |
Surface finish | pre-galavanised |
Corrosion protection class | C2 |
For drilling trapezoidal corrugated sheets, we recommend to use the Piercing Tool LOT 3; for fixing, we recommend a M8x100 (Part No. 138608) cross bolt.
Note: Each through bolt is to be secured by means of a locking nut; the same applies to dynamic loads.
Blind steel rivets or sheet metal screws may not be used in Sprinkler Systems.
Certification
Type M8 (125693) and M10 (125806) for Sprinkler Systems according to VdS Standards: G4820032 and Type M10 for Sprinkler Systems according to FM ≤ 3".