Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
M12-25/125
Group: 1738
Part number 112647
Stainless steel anchor rod for push-through and pre-positioned mounting in concrete tensile zones for heavy loads in M&E services and plant construction
Suitable for attaching pipelines, channels and brackets in closed rooms (except damp locations)
No special drill required, small edge and centre distance
Sikla Anchor Injection Systems
PDF (8.81 MB)
Pre-assembled with washer and hexagon nut.
Fire Resistance 30 min | 9,86 kN |
Fire Resistance 60 min | 4,59 kN |
Fire Resistance 90 min | 1,86 kN |
Fire Resistance 120 min | 0,56 kN |
Primary element material | Stainless Steel A4 |
Class | A4-70 |
Corrosion protection class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
1. Drill hole according to min. setting depth vertically to the surface.
2. Careful cleaning of drill hole with Steel brush and Blow-Out Pump.
3. Screw Mixing Nozzle onto the cartridge; foreshots to be removed and fill 2/3 of drill hole with resin starting from botton of the hole.
4. Drive the anchor manually into plastered borehole up to its embedment mark.
5. When reaching the embedment mark, plaster must be apparent.
6. Respect hardening time, when tighten the anchor with instructed torque.
Detailed assembly instruction is attached to the product.
Certification
Sikla Approval ETA-15/0260