Eye-Plate HP HCP
Group: A299
Connecting component for direct attachment of rod hanger assemblies to beam sections with flange width 80–99 mm
Pre-welded Eye-Plate serves as a base for connecting Rod Hanger Load Chain Assembly LKV (sizes M10 to M16) and Pipe Clamps type Stabil Form C LK
Overview of Types
General Information
Connecting component for the direct attachment of rod hanger assemblies to beam sections with a flange width 80-99mm. The pre-welded Eye-Plate serves as a basic element for the connection of the Rod Hanger Load Chain Assembly LKV in sizes M10 up to M16 rod and Pipe Clamps type Stabil Form C LK.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VZ,perm. |
HP 80/99 - A M10 HCP | 11,20 kN |
HP 80/99 - A M12 HCP | 12,10 kN |
HP 80/99 - A M16 HCP | 12,50 kN |
HP 80/99 - B M10 HCP | 11,20 kN |
HP 80/99 - B M12 HCP | 12,10 kN |
HP 80/99 - B M16 HCP | 12,50 kN |
The implementation and construction requirements of the components, their design as well as their verifications and load tests were carried out following the standards VGB R 510 L part I, KTA 3205.3 and DIN EN 13480-3.
Note: Delivery date on request
Software
This product is available in the following software.
Installation
The Beam System Eye-Plate HP 80/99 is clamped to the supporting steel beam section by means of Assembly Set MS 5P M12 S2. The Eye-Plate can also be fastened directly to concrete by means of 2no. M12 anchors.
Type A: Load Chain runs crosswise to the beam
Type B: Load Chain runs longitudinally to the beam