End Support WBD 41 A4
Group: 1730
End Support WBD 41 ss combined with a channel is suitable for setting up support structures on walls, floors and ceilings as a base for frame structures
Overview of Types
General Information
In combination with a channel, End Support WBD 41 ss is particularly suitable for setting up support structures attached to walls, floors and ceilings as a base for frame structures.
Certification
Technical specifications
Material base body | Stainless Steel A4 |
Corossion class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
Load range
Type | VX,perm. |
WBD 41 A4 | 7,00 kN |
Software
This product is available in the following software.
Installation
Normally, two anchors grouped opposite to each other and along the load axis are sufficient. Only in exceptional cases (e.g. high props in frameworks) four anchors are required.
Tightening torque 40 Nm.
Suitable for stainless steel channels with width 41 mm up to height <= 62 mm.
Documents
- Anchor Loads - End Support WBD ss
PDF (0.11MB)