DN 15 - 40
DN 50 - 80
DN 100 - 150
Assembly Group BG22 F 80 HCP
Group: 1102
Assembly group for fastening pipes without complex requirements and without heat insulation on SiFramo F 80 sections
Guided supports and fixed points can be created by adapting the supplied hexagon nuts
Supplied U Bolt fasteners vary depending on the required clamping range
Overview of Types
General Information
An Assembly Group for the fastening of pipes without complex requirements and without heat insulation on SiFramo F 80 sections. By adapting the hexagon nuts supplied, both guided supports and fixed points can be created. The U Bolt fasteners supplied vary depending on the required clamping range.
Certification
Technical specifications
Material base body | steel |
Material sliding element | PA 6.0 |
Material connecting element | steel |
Surface | HCP |
Corossion class | C4 |
Software
This product is available in the following software.
Installation
The assembly of the individual components to form an Assembly Group is carried out during the course of pipe installation on the construction site. When used as a guided support, the nuts located both above and below the UB fastening must be tightened, enabling the pipe to freely move. In the case of fixed points, the permissible forces of the structural connection and bending forces of the bolt must not be exceeded.