Welding Plate SPL UNI HCP
Group: A430
Can also be mounted on the TP F beam sections for larger attachment surfaces
Can also be mounted on the TP F beam sections for larger attachment surfaces
Overview of Types
General Information
Interface element to enable a welded connection of load chains, spring hangers etc. to Beam Section TP F. Our type 'SPL universal' enables a welded connection to primary steel with flange width up to 300 mm. At the same time it's possible to install type 'SPL universal' to Beam Section TP F if a larger installation surface is needed. The welding plate can be welded directly without previous treatment due to a corrosion-resistant weld-thru coating which is compatible with both the HDG surface of the siFramo section and the health and safety requirements of the welding process.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Software
This product is available in the following software.
Installation
Depending on the type, different installation methods are recommended:
a) Installation of SPL universal with Flange Screws SCR FLA TT M10 x 30 (part no. 116479) to Beam Section TP F.
b) Installation of SPL universal by means of 1 Assembly Set 5P M12 S to primary steel with flange width between 100 and 300 mm.