41/41-45
41/41-45 D
End Support WBD 41 HCP
Group: 1856
End Support WBD combined with Sikla Channel MS 41 is ideal for setting up structures on walls, floors and ceilings as a base for frame structures
Generous dimensions and diamond-shaped mounting plate provide high bending moment and stabilize lateral loads
HCP design allows use in areas with higher corrosion protection requirements
Overview of Types
General Information
In combination with a Sikla Channel MS 41, End Support WBD is particularly suitable for setting up structures attached to walls, floors and ceilings as a base for frame structures made of Sikla Channels. The generous dimensions and the diamond shape of the mounting plate provide for a high bending moment and safely stabilise lateral loads. The HCP design allows for use in areas with higher corrosion protection requirements.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | VX,perm. |
WBD 41/41-45 HCP | 7,00 kN |
Software
This product is available in the following software.
Installation
Normally, two anchors grouped opposite to each other and along the load axis are sufficient. Only in exceptional cases (e.g. high props in frameworks) four anchors are required.
Tightening torque 40 Nm.
Suitable for stainless steel channels with width 41 mm up to height <= 62 mm.