AK F 100
AK F 100-80
Cantilever Bracket AK F100 HCP
Group: A820
Galvanised hollow-box section with welded end plate serving as a cantilever arm
Can be used as a crossbar with End Support STA and Self Forming Screws FLS
Types F 100-80 and F 100-80-E allow combination of Beam Section F 100 with F 80/80
Overview of Types
General Information
Galvanised hollow-box-section with welded end-plate to serve as cantilever arm. May be used as a crossbar when combined with End Support STA and 4 x Self Forming Screw FLS. By means of the round holes in the base plate a direct connection to excisting cast-in channels is possible. With the types F 100-80 and F 100-80-E a combination of Beam Section F 100 with F 80/80 is possible.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VX,perm. | VX,perm. | -VY,perm. | VY,perm. | -VZ,perm. | VZ,perm. |
AK F100- 400 HCP | 46,40 kN | 46,40 kN | 27,20 kN | 27,20 kN | 23,60 kN | 23,60 kN |
AK F100- 800 HCP | 46,40 kN | 46,40 kN | 27,20 kN | 27,20 kN | 23,60 kN | 23,60 kN |
AK F100-1200 HCP | 46,40 kN | 46,40 kN | 27,20 kN | 27,20 kN | 23,60 kN | 23,60 kN |
Type | -MX,perm. | MX,perm. | -MY,perm. | MY,perm. | -MZ,perm. | MZ,perm. |
AK F100- 400 HCP | 3,6 kNm | 3,6 kNm | 2,9 kNm | 2,90 kNm | 2,2 kNm | 2,2 kNm |
AK F100- 800 HCP | 3,6 kNm | 3,6 kNm | 2,9 kNm | 2,90 kNm | 2,2 kNm | 2,2 kNm |
AK F100-1200 HCP | 3,6 kNm | 3,6 kNm | 2,9 kNm | 2,90 kNm | 2,2 kNm | 2,2 kNm |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
With 4 x Self Forming Screw FLS when fixed to another siFramo hollow-box-section. Alternatively with two suitable wall anchors through holes “A” when fixed directly to building structure.
Configuration AK F 100: Plate welded to Beam Section F 100
Configuration AK F 100-80: Plate welded to Beam Section F 80
Documents
- siFramo - ETA-24/0471
PDF (2.15MB)
- Static Guideline - siMotec
PDF (8.58MB)