Go to your local Sikla page and discover offers for your country or sales region:

Country

TPH F 80

TPH F 80/30

Beam Section Holder TPH F 80 W HCP

Group: A425

Form-fitting, reinforcing bracket for F 80 or F 80/30 Beam Sections

Mounting directly to the building structure or directly to the free-standing or concret-embedded profile

Select a Type

Overview of Types
General Information
Installation

Overview of Types

Info	Type	Weight	Quantity	Part number
	TPH F 80/30 HCP	0,349 kg/pcs.	10 pcs.	116672

	TPH F 80 HCP	0,5 kg/pcs.	10 pcs.	195765

Installation

Connecting one Beam Section F80 or F 80/30 90° to another one by using 6 x Self Forming Screw FLS applied through all elongated holes.
Connecting to any other surface or member by using 2 x Self Forming Screws FLS through the two elongated holes on the top of the Beam Section Holder TPH F80 plus 2 appropriate fixing elements up to M12 through the two holes “d1”.

General Information

Interface element to connect 90° intersecting Beam Sections F80 or F 80/30. Alternatively the Beam Section Holder TPH may be used to connect only one beam section to an even surface with suitable wall anchors or with cast-in channel accessories.

Certification

Technical specifications

Primary element material	steel
Surface finish	HCP
Corrosion protection class	C4

Load range

Type	-V_X,perm.	V_X,perm.	-V_Y,perm.	V_Y,perm.	-V_Z,perm.	V_Z,perm.
TPH F 80/30 HCP	14,40 kN	14,40 kN	28,10 kN	28,10 kN	18,30 kN	18,30 kN
TPH F 80 HCP	14,40 kN	14,40 kN	28,10 kN	28,10 kN	18,30 kN	18,30 kN

Type	-M_Y,perm.	M_Y,perm.	-M_Z,perm.	M_Z,perm.
TPH F 80/30 HCP	1,2 kNm	1,2 kNm	1,2 kNm	1,2 kNm

The specified load values are permissible loads and contain the partial safety factors γ(M2) = 1,25 (DIN EN 1993-1-8:2010-12, chart 2.1) and γ(G) = 1,35 (DIN EN 1990:2010-12, chart A1.2(B)) for permanent actions.

Also available with DualShield for high corrosion protection within C5H environments.

Software

This product is available in the following software.

Info	Type	Weight	Quantity	Part number
	TPH F 80/30 HCP	0,349 kg/pcs.	10 pcs.	116672

	TPH F 80 HCP	0,5 kg/pcs.	10 pcs.	195765