TCS 41
Beam Clamp TCS 41
Group: 1337
Part number 110004
Connection of Sikla Channel MS 41 directly to steel beams
No obstruction of the channel opening
Technical Data
B | 35 mm |
H1 | 20 mm |
H2 | 32 mm |
L1 | 15.25 mm |
Ma | M8 |
Cast iron part, completely pre-assembled with clamping bolt and locking nut.
Load range
-VZ,perm. | 4,00 kN |
The nominal loads indicated apply to new Beam Clamps fixed to undamaged beam flanges only.
Technical specifications
Material base body | cast steel |
Material connecting element | steel |
Class | 8.8 |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Installation
Insert the foot of the Beam Clamp into the slot on the back of the channel, twist by 90° and push it against the beam's flange. First tighten bolt of Beam Clamp (hand-tight), then tighten further with 1 1/2 turns. The sharpened tip of the bolt will dent the beam thus providing a high level of safety. At last tighten locking nut.
Every channel (statically determined) has to be fixed at least twice.
Clamping range on parallel flange: 20 mm