TCS 1
Beam Clamp TCS 1 M10/M10 HCP
Group: 1837
Part number 162151
Solid connecting element for mounting pipes, ducts and devices on steel profiles
Combination with Universal Joint enables vertical alignment on inclined beams
Technical Data
B | 33 mm |
B1 | 21.5 mm |
H1 | 26.2 mm |
L | 44 mm |
L2 | 23 mm |
Ma | M10 |
Mi1 | M10 |
Mi2 | M10 |
Pre-assembled with clamping bolt and locking nut.
Load range
-VX,perm. | 3,11 kN |
VX,perm. | 3,11 kN |
VY,perm. | 1,83 kN |
-VZ,perm. | 5,00 kN |
The nominal loads indicated apply to new Beam Clamps fixed to undamaged beam flanges only.
Technical specifications
Material base body | cast steel |
Material connecting element | steel |
Surface | HCP |
Corossion class | C4 |
Certification
Approved and accepted by VdS and FM for use with stationary fire extinguishing systems.
For different application fields: G4820023, G4800039, G4800040, G4800042, G4800043, G4800044, G4800045
Installation
Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting instructions. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tighten the locking nut for securing the installation.
Use an additional Holding Bracket HK 41 for mounting in the aera of the cutting edge of a channel.
Clamping range on parallel flange: 26 mm
Advice: Read relevant mounting instructions before installation!
Documents
- FM Approval - Sikla Beam Clamps TCS
PDF (0.57MB)
- VdS Approval - Sikla Beam Clamp TCS with Safety Strap - G4800040
PDF (0.32MB)
- VdS Approval - Sikla Beam Clamp TCS 1 - G4800039
PDF (0.29MB)
- VdS Approval - Sikla Beam Clamp TCS 1 M10/M10 - G4820023
PDF (0.84MB)