Assembly Set MS 5P S HCP
Group: A640
Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section
Overview of Types
General Information
Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VY,perm. | VY,perm. | -VZ,perm. | VZ,perm. |
MS 5P M12 S HCP | 26,30 kN | 26,30 kN | 12,00 kN | 12,00 kN |
MS 5P M16 S HCP | 32,00 kN | 32,00 kN | 13,60 kN | 13,60 kN |
The specified F(z) data relate to the worst case with flange thicknesses 30 mnm (M12) or 40 mm (M16) as well as a coefficient of adhesion µ(adhesion) = 0,20.
A possibly operating tensile force F(y) isn't included.
Software
This product is available in the following software.
Installation
1. Position Beam Clip with the split end on beam section.
2. Install support plate and HR trimming and tighten accordingly.
The support plate secures a rectangular assembly of the bolt and prevents its shifting or bending stress. In conjunction with the HR trimming a continuous and predictable preload force is guaranteed.
Tightening torques:
| Type | Size range [mm] | Tightening torque MA [Nm] / plus revolution |
|---|---|---|
| M12 S | 1 - 30 | 60 / 90° |
| M16 S | 4 - 40 | 140 / 90° |
Documents
- Static Guideline - siMotec
PDF (8.58MB)