799 search results for:

This document provides technical data for the Support Cone SMD 1, including permissible bending stress and deflection limits. It highlights that anchor values may restrict application and includes diagrams for load and length parameters.

This document provides technical data for the Socket Angle ST, including instructions for calculating the load capacity of cantilever constructions. It explains how to combine permissible loads from the bracket and the Socket Angle table, and includes relevant diagrams for reference.

This document provides technical data and load values for the Hook Sleeve SP, designed for fixing to steelwork and decking. It includes a load chart and key specifications for safe application.

This file presents technical data and load charts for the End Support WBD 41-75/75, designed for use with Channel 41-75/75/3.0 and 41-75/75/3.0 D. It includes anchor load classes, material stress and deflection limits, and diagrams illustrating different installation scenarios.

Overview of the End Support WBD 41-75/65, including load charts for use with Channel 41-75/65/3.0 and 41-75/65/3.0 D. The document details permissible anchor load classes, material stress and deflection limits, and provides diagrams for different installation scenarios.

Technical summary for the End Support WBD 41/62, featuring load charts for use with Channel 41/62/2.5 and 41/62/2.5 D. The document outlines permissible anchor load classes, material stress and deflection limits, and includes diagrams for different installation scenarios.

Technical summary for the End Support WBD 41/52, featuring load charts for use with Channel 41/52/2.5 and 41/52/2.5 D. The document covers permissible anchor load classes, material stress and deflection limits, and includes diagrams for different installation scenarios.

Summary of technical data for the End Support WBD 41/41-45, including load charts for use with Channel 41/41/2.5 or 41/45/2.5. The document outlines permissible anchor load classes, deflection and material stress limits, and provides diagrams for different installation configurations. [Loads_End-...D-41-41-45 | PDF]

Technical overview of the End Support WBD 41/21-31, including load charts for use with Channel 41/21/2.0 or 41/31/2.0. The document specifies permissible anchor loads, deflection limits, and material stress restrictions, supported by diagrams for different installation scenarios.

The document provides permissible load values for Sikla siConnect channels under two-point load application. It includes MS 27 and MS 41 profiles, both single and double channels, with tables for spans from 20 cm to 600 cm. Calculations consider channel slots and dead weight according to RAL-GZ 655-C, with limits of σ ≤ 185 N/mm² and f ≤ L/200. Technical data such as section modulus, moment of inertia, radius of gyration, cross-sectional area, and maximum point and torsional moments are also included. Notes specify connection requirements for short double-channel sections.

The document lists permissible loads for Sikla siConnect channels under three-point load application, covering MS 27 and MS 41 profiles (single and double channels) for spans from 20 cm to 600 cm. Calculations include channel slots and dead weight according to RAL-GZ 655-C, with limits of σ ≤ 185 N/mm² and f ≤ L/200. It also provides technical data such as section modulus, moment of inertia, radius of gyration, cross-sectional area, and maximum point and torsional moments. Notes indicate connection requirements for short double-channel sections.

The document lists slot patterns and measurements for Sikla siConnect channels. It includes dimensions for MS 27 and MS 41 profiles (single and double channels): width (B), height (H), thickness (t), edge distance (e), and slot pattern details (slot width b, slot length l, hole diameter d). Slot patterns vary by profile, with MS 41 series typically using 13 × 40 mm slots and MS 27 series using 8.5 × 18.5 mm slots. Larger profiles (e.g., 41-75/65/3.0) include Ø17 mm holes.

The documents provide comprehensive load and technical data for Sikla siConnect channels (MS 27 and MS 41 series). They include distributed load applications across spans from 20 cm to 600 cm, covering single and double channel configurations. All values account for channel slots and dead weight, calculated according to RAL-GZ 655-C, with limits of σ ≤ 185 N/mm² and f ≤ L/200. Technical specifications detail section modulus, moment of inertia, radius of gyration, cross-sectional area, and maximum point and torsional moments. Installation notes specify slot patterns and fasteners for short double-channel sections.

The documents summarize permissible loads and technical data for Sikla siConnect assembly channels. They cover MS 27 and MS 41 profiles, including single and double channels, with load tables for spans from 20 cm to 600 cm under centrical load application. All values consider channel slots and dead weight, calculated according to RAL-GZ 655-C, with limits of σ ≤ 185 N/mm² and f ≤ L/200. Technical data includes section modulus, moment of inertia, radius of gyration, cross-sectional area, and maximum point and torsional moments. Installation notes specify slot patterns and fasteners for short double-channel sections.

The document provides detailed technical specifications for the Channel MS 41 profiles. It includes dimensional data (width, height, thickness), section properties (section modulus, moment of inertia, radius of gyration), and mechanical performance values such as maximum point carrying capacity, torsional moment, and cross-sectional area. Both single and double channel configurations are covered, with notes on installation requirements for short sections. All values refer to slotted channels.

This document provides permissible load data for Channel MS 41-75/75/3.0 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern IV is specified for installation.

This document provides permissible load data for Channel MS 41-75/65/3.0 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern IV is specified for installation.

This document provides permissible load data for Channel MS 41/62/2.5 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document provides permissible load data for Channel MS 41/52/2.5 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document provides permissible load data for Channel MS 41/45/2.5 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document provides permissible load data for Channel MS 41/41/2.5 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document provides permissible load data for Channel MS 41/41/2.0 under centrical load application. It includes tables listing allowable loads (in Newtons) for span lengths from 20 cm up to 600 cm for both single and double channel configurations. The calculations consider channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document details permissible loads for Channel MS 41/31/2.0 under centrical load application. It provides a table of allowable loads (in Newtons) for span lengths from 20 cm to 500 cm. The calculations account for channel slots and dead weight, based on RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Slot pattern III is specified for installation.

This document provides permissible load data for Channel MS 41/21/2.0 under centrical load application. It includes tables showing allowable loads (in Newtons) for different span lengths (20 cm to 500 cm) for both single and double channel configurations. The calculations consider channel slots and dead weight, following RAL-GZ 655-C standards, with limits for stress (σ ≤ 185 N/mm²) and deflection (f ≤ L/200). Installation details such as slot pattern III are also referenced.