Speed Nut NT CC41
Group: 1314
Assembly aid for vertical rails or hard-to-reach places – effectively replaces a ‘third hand’.
Can be used universally in all Sikla mounting rails with a rail width of 41 mm – regardless of the rail height.
Smooth movement and secure fastening – no snagging on screw heads, no settling after tightening.
Overview of Types
General Information
In particular useful when installing in vertical channels or in places of difficult access. Further advantages: for all Sikla Channels MS 41, independent of the height of the channel, no getting stuck on bolt heads when sliding in the channel, no appearance of settlement after tightening.
Certification
Technical specifications
Material base body | steel |
Material connecting element | Spring steel, stainless |
Class | 5.6 |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | VX,perm. | -VZ,perm. |
NT CC41 M 6 | 0,90 kN | 3,20 kN |
NT CC41 M 8 | 2,10 kN | 5,80 kN |
NT CC41 M10 | 3,40 kN | 5,80 kN |
NT CC41 M12 | 9,00 kN | 10,00 kN |
NT CC41 M16 | 6,00 kN | 10,00 kN |
Software
This product is available in the following software.
Installation
After inserting the Speed Nut into the channel opening, it is - by exerting slight pressure on it - turned to the right as far as it will go; deinstallation may be effected by following the instructions in reverse order.
Installation and deinstallation do not require tools and may be repeated several times.
| M6 | M8 | M10 | M12 | M16 | |
|---|---|---|---|---|---|
| Tightening torque 8.8 [Nm] | 10 | 25 | 40 | 80 | 80 |
Using lower steel classes, the value are to be reduced accordingly.