TSM-LP
Screwbolt TSM-LP 6X 40 VZ30
Group: 1405
Part number 115026
Suitable for quick and safe fixation of Sikla Channel and further components to concrete and masonry ceilings or walls.
Approved for applications under seismic impact of category C1
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
TSM-LP
Group: 1405
Part number 115026
Suitable for quick and safe fixation of Sikla Channel and further components to concrete and masonry ceilings or walls.
Approved for applications under seismic impact of category C1
For load values, see additional documents.
Primary element material | steel |
Surface finish | electro galvanized (Fe//Zn) |
Corrosion protection class | C2 |
Further technical information (load capacities under fire exposure, appr. loads in further concrete classes and precast pre-stressed hollow core slabs) are shown in the download area.
Certification
ETA-16/0655 and ETA-16/0656
For installation an impact wrench or rotary screwgun with a Torx bit T30 is to be used. Screw in the bolt screw in pre-drilled hole. The special thread guarantees a mechanical form lock with the base material. Fine adjustment of depth is possible if the screwbolt is initially installed too deep. The screwgun or impact wrench should not be used with any hammer-action setting engaged on the tool.
Types 6x40 and LPS 6x40: Only to be used as multiple fixing for non-load-bearing systems in concrete and prestressed concrete hollow plate ceilings.
Screwbolt TSM - ETA 16/0656
PDF (1.77 MB)
Screwbolt TSM - ETA 16/0655
PDF (3.7 MB)
VdS Approval - Sikla Anchors – Types AN, BZ, TSM (DN 0–100)
PDF (233 KB)
Sikla Metal Anchor Systems
PDF (4.09 MB)
Screwbolt TSM - Type Overview
PDF (100 KB)
DoP - Srewbolt TSM (Multiple use)
PDF (564 KB)