Resin Anchor Rod VMU-A
Group: 1409
Anchor rod for pre-installation with Injection Systems VMU plus, VME plus and VMH
Suitable for anchoring in concrete tensile pressure zones or brickwork with adjustable embedment depth
Ideal for attaching pipelines, channels and brackets in closed rooms (except damp locations)
Overview of Types
General Information
Anchor Rod for pre-installation, to be used with Injection Systems VMU plus, VME plus and VMH. For anchoring in concrete tensile pressure zones or in brickwork. Due to the variable anchoring depth the effective embedment depth can be adjusted to the requested load. Suitable for attaching pipelines, channels, brackets, etc. in closed rooms - except for damp locations (stainless steel version available on request). No special drill required. Small edge and centre distance. Approved for use under seismic action according to the performance category C1.
Certification
Sikla Approval ETA-15/0270, ETA-17/0307
Approval ETA 17/0716, 19/0483
Technical specifications
Material base body | steel |
Class | 5.8 |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Detailed technical information see respective injection systems.
Software
This product is available in the following software.
Installation
1. Drill hole according to min. setting depth vertically to the surface.
2. Careful cleaning of drill hole with Steel brush and Blow-Out Pump.
3. Screw Mixing Nozzle onto the cartridge; foreshots to be removed and fill 2/3 of drill hole with resin starting from botton of the hole.
4. Drive the anchor manually into plastered borehole up to its embedment mark.
5. When reaching the embedment mark, plaster must be apparent.
6. Respect hardening time, when tighten the anchor with instructed torque.
Image: h(ef) + t(fix) = usable length of the threaded rod (without nut and washer)
Detailed assembly instruction is attached to the product.
Documents
- Injection System VMU plus - ETA 17/0307
PDF (21.36MB)
- Injection System VMU plus - Fire resistance of concrete
PDF (5.14MB)
- Sikla Anchor Injection Systems
PDF (8.81MB)
- DoP - Injection System VMU plus Concrete
PDF (8.17MB)