Pipe Shoe LK-HV 150 DN 250 (10'') HCP

Group: A734

Part number 110120

Height-adjustable Pipe Shoe with PUR insulation insert for installation on steel beams from 80mm

Height-adjustable in steps of 2.5 mm

Technical Data

Documents

Brochures

Sikla Pipe Supports - Comprehensive Solutions for Secure and Efficient Installations
PDF (5.52 MB)

Datasheets / Loads

Load Capacities for Insulated and Hanging Supports - Sikla Technical Data
PDF (110 KB)

b	60 mm
B₂	105 mm
D	273 mm
D₁	396 mm
D₂	273 mm
D_S1	60 mm
H	150 mm
H_{V min}	150 mm
H_{V max}	180 mm
L₂	255.6 mm
S_G	M16
S_L	60 mm
t	5 mm
W	45°

Upper and lower part are bolted together allowing height adjustment. The slide plate is fixed to the lower part. Pipe clamp, load distribution plate and insulation insert are summed.

Technical specifications

Max. temperature insulation	120 °C
Min. temperature insulation	-70 °C
Max. temperature sliding element	130 °C
Min. temperature sliding element	-20 °C

Fire Performance

Class EL according to DIN EN 13501-1

Also available with DualShield for high corrosion protection within C5H environments. Minimum quantities must be observed for pipe shoes outside the DN range. In addition, delivery times apply for these items on request.

Installation

NB	Form	Height H as delivered [mm]	Height H range [mm]
DN 25 - 50	Single clamp	150	137,5 ... 167,5
DN 65 - 80	Single clamp	150	147,5 ... 177,5
DN 100 - 250	Double clamp	150	150 ... 180
DN 300	Double clamp	150	150 ... 160

The laying rules of DIN 4140 have to be respected (existing gaps have to be sealed by means of sealing paste if necessary).

Tightening torque screw connections:

Clamping bolts	tightening torque [Nm]	height adjustment	tightening torque [Nm]
DN 25 - 80	25	bolts in the bar	80
DN 100 - 300	30	bolts in the bar	80

Primary element material	steel
Isolating element material	PUR
Sliding element material	PA 6.0
Connecting element material	steel
Surface finish	HCP
Corrosion protection class	C4

Pipe shoe static coefficient of friction u (without sliding plate) - siFramo and siMotec	0,3
Pipe shoe static coefficient of friction u (with sliding plate) - siFramo and siMotec	0,2