Pipe Clamp STABIL RB-A 84- 89 BL
Group: 1260
Part number 110322
For high static requirements in plant constructions, design similar to DIN 3567
Holes for standard tensioning bolts and anchors without loss of load capacity
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Group: 1260
Part number 110322
For high static requirements in plant constructions, design similar to DIN 3567
Holes for standard tensioning bolts and anchors without loss of load capacity
RB-A Type Overview
PDF (234 KB)
B1 | 165 mm |
b1 | 40 mm |
D | 89 mm |
D1 | 89 mm |
d | 13 mm |
e | 132 mm |
H | 99 mm |
t | 5 mm |
Two-piece pipe clamp delivered without bolts.
For suitable bolts, please see catalog.
-VZ,perm. | 15,50 kN |
Admissible load valid with fixation on both sides.
The max. permissible load capacity of the connected parts (e.g. anchors) shall be considered.
The max. adm. load capacity is determined by the application of statistical methods resulting from the breaking loads, under observance of a max. adm. deformation of 1.5 mm resp. 2% of the max. stretchable pipe dia.
Primary element material | steel |
Surface finish | uncoated |
Tightening torque and recommended clamping bolts:
| Size range [mm] | Recommended clamping bolts | Tightening torque [Nm] |
|---|---|---|
| 14 - 49 | M10 x 40 | 20 |
| 57 - 109 | M12 x 45 | 40 |
| 109 - 163 | M12 x 50 | 40 |
| 163 - 273 | M12 x 55 | 40 |
| 317 - 374 | M16 x 60 | 100 |
| 397 - 610 | M16 x 65 | 100 |
Certification
