N 1/2"
N M10
N M10 RL
ST 1"
ST 1/2"
Stabil M10
ST M12
Stabil M16
Mounting Plate GPL
Group: 1227
For wall, ceiling and floor installation of mounting elements in M&E services
Overview of Types
General Information
For wall, ceiling and floor installation of mounting elements in M&E services.
Certification
Technical specifications
Permissible Tension σ{zul} | 160,00 N/mm² |
Material base body | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | -VZ,perm. |
GPL N M 8 | 1,50 kN |
GPL N 2G | 1,50 kN |
GPL N M10 | 1,50 kN |
GPL N M10 RL | 1,50 kN |
GPL N 1/2'' | 1,50 kN |
GPL ST M10 | 4,00 kN |
GPL ST M12 | 5,00 kN |
GPL ST M16 | 8,50 kN |
GPL STABIL R 1/2'' | 8,50 kN |
GPL STABIL R 3/4'' | 8,50 kN |
GPL STABIL R 1'' | 8,50 kN |
Type | Permissible bending moment Mb,perm. |
GPL N M 8 | 8,8 Nm |
GPL N 2G | - |
GPL N M10 | 17,2 Nm |
GPL N M10 RL | 17,2 Nm |
GPL N 1/2'' | 25 Nm |
GPL ST M10 | 17,2 Nm |
GPL ST M12 | 29,6 Nm |
GPL ST M16 | 70,3 Nm |
GPL STABIL R 1/2'' | 95 Nm |
GPL STABIL R 3/4'' | 180 Nm |
GPL STABIL R 1'' | 350 Nm |
Limitation of max. perm. bending moment caused by the Mounting Plate or the loading capacity of the grub screw or of the threaded tube.
σ(zul) ≤ 160 N/mm² f(zul) < 5 mm
Software
This product is available in the following software.
Installation
| Type | Max. lever arm [mm] | Welding method |
|---|---|---|
| Normal M8 | 150 | resistance welding |
| Normal M10 / M10 RL | 200 | resistance welding |
| Normal 2G M8/M10 | M8: 150 M10: 200 |
resistance welding |
| Normal R 1/2" | 300 | Widerstandsschweißung |
| Stabil M10 | 200 | resistance welding |
| Stabil M12 | 300 | resistance welding |
| Stabil M16 | 300 | slot welding |
| Stabil R 1/2" | 350 | slot welding |
| Stabil R 3/4" | 450 | slot welding |
| Stabil R 1" | 500 | slot welding |