Guiding Bracket FW F 80 - Z HCP

Group: A705

Enables guiding of Pipe Shoes with different plate thicknesses on siFramo F80 beam sections

Type Z versions are suitable for specified maximum plate thickness and allow absorption of lifting forces

Select a Type

Overview of Types
General Information
Installation

Overview of Types

General Information

Using the Guiding Bracket FW F it's possible to guide Pipe Shoes with different plate thicknesses on siFramo F80 beam sections. The different versions of Type Z are suitable for the respective specified maximum plate thickness (t)and so additionally allow the absorption of lifting forces.

Certification

Technical specifications

Material base body	steel
Surface	HCP
Corossion class	C4

Load range

Type	V_Y,perm.	-V_Z,perm.
FW-Z F 80- 6 HCP	1,90 kN	5,00 kN
FW-Z F 80- 9 HCP	1,90 kN	5,00 kN
FW-Z F 80-12 HCP	1,90 kN	5,00 kN
FW-Z F 80-15 HCP	1,90 kN	5,00 kN

Type	M_X,perm.
FW-Z F 80- 6 HCP	0,4 kNm
FW-Z F 80- 9 HCP	0,4 kNm
FW-Z F 80-12 HCP	0,4 kNm
FW-Z F 80-15 HCP	0,4 kNm

The torque is calculated by M = F(y) x h, whereas the perm. load for F(y) may not be exceeded. Dimension h refers from the middle of the pipe to the top of the base plate.
The perm. loads have been determined by load tests following DIN EN 13480-3 annex J.
The used Pipe Shoe has to be verified separately.

Also available with DUALSHIELD for high corrosion protection within C5H environments.

Variant Z 12 is suitable for Sikla pipe shoes.

Software

This product is available in the following software.

Installation

Installation on top of Beam Section TP F 80 with 2 Self Forming Screws FLS F per Guiding Bracket, i.e. per set 4 Self Forming Screws have to be used altogether. You can find the Self Forming Screw in the siFramo chapters.
For Type Z exists a clearance of 3 mm in the vertical z-axis. Please ensure a clearance of 3 mm in the vertical y-axis for all types.