WBD-P F 80 - 161/200
End Support WBD-P-4KT 161/200-F 80 HCP
Group: A421
Part number 117165
Plug-in component for creating a square end plate at the open end of Beam Section TP F80 or Beam Bracket/Cantilever Bracket AK F80
Variation 'T' with octagonal insert allows full utilisation of the beam section within the space required by the End Support WBD
Technical Data
BP | 310 mm |
BP1 | 200 mm |
bP | 18 mm |
HP | 320 mm |
HP1 | 260 mm |
IZP | 20 mm |
LG | 203 mm |
tP | 12 mm |
TP1 | 27 mm |
Load range
-VX,perm. | 37,20 kN |
VX,perm. | 37,20 kN |
-VY,perm. | 85,50 kN |
VY,perm. | 85,50 kN |
-VZ,perm. | 89,20 kN |
VZ,perm. | 89,20 kN |
-MX,perm. | 3,6 kNm |
MX,perm. | 3,6 kNm |
-MY,perm. | 4,8 kNm |
MY,perm. | 4,80 kNm |
-MZ,perm. | 4,7 kNm |
MZ,perm. | 4,7 kNm |
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Installation
Depending on the situation, different options are recommended:
a) Directly to building structure: 4 x suitable wall anchors and 4 Self Forming Screws FLS applied to the square/octagonal insert
b) To traditional steel beams between 80 – 310 mm flange dimensions: 1 x Assembly Set 5P M12 S, M16 S and 4 Self Forming Screws FLS applied to the square/octagonal insert
c) To Sikla siMotec steel beams 100/120: with Bracket Plates FV 100/120 when positive mechanical connection required
The Beam Section TP F 80 connected to the End Support WBD F 80 has to be screwed with 4 Self Forming Screws FLS F. On each of the opposite sides 2 Self Forming Screws FLS F are necessary. The permissible distance between base plate WBD and profile must not exceed 30 mm.
Base plate finish:
| Type | Base plate finish |
|---|---|
| WBD F 80-80/120 | flat |
| WBD-P F 80-121/160 | corrugated |
| WBD-P F 80-161/200 | corrugated |
| WBD-P F 80-201/310 | corrugated |
| WBD F 80-T | flat |
Documents
- siFramo - ETA-24/0471
PDF (2.15MB)
- Static Guideline - siMotec
PDF (8.58MB)