41/41-45
End Support WBD 41/41-45 HCP
Group: 1856
Part number 198070
End Support WBD combined with Sikla Channel MS 41 is ideal for setting up structures on walls, floors and ceilings as a base for frame structures
Generous dimensions and diamond-shaped mounting plate provide high bending moment and stabilize lateral loads
HCP design allows use in areas with higher corrosion protection requirements
Technical Data
BP | 135 mm |
bP | 11 mm |
HP | 135 mm |
HP1 | 100 mm |
IZP | 14 mm |
LG | 100.5 mm |
tP | 6 mm |
Load range
VX,perm. | 7,00 kN |
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Certification
Installation
Normally, two anchors grouped opposite to each other and along the load axis are sufficient. Only in exceptional cases (e.g. high props in frameworks) four anchors are required.
Tightening torque 40 Nm.
Suitable for stainless steel channels with width 41 mm up to height <= 62 mm.