41-75/75
41-75/75 D
41/41-45 D
41/41-45
End Support WBD 41
Group: 1356
End Support WBD combined with Sikla Channel MS 41 is ideal for setting up support structures on walls, floors and ceilings as a base for frame structures
Generous dimensions and diamond-shaped mounting plate provide high bending moment and stabilize lateral loads
Overview of Types
General Information
In combination with a Sikla Channel MS 41, End Support WBD is particularly suitable for setting up support structures attached to walls, floors and ceilings as a base for frame structures made of Sikla Channels. The generous dimensions and the diamond shape of the mounting plate provide a high bending moment and safely stabilise lateral loads.
Certification
Technical specifications
Material base body | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | VX,perm. |
WBD 41/21-31 | 2,00 kN |
WBD 41/41-45 | 2,00 kN |
WBD 41/52 | 4,00 kN |
WBD 41/62 | 4,00 kN |
WBD 41-75/65 | 4,00 kN |
WBD 41-75/75 | 4,00 kN |
WBD 41/21 D | 4,00 kN |
WBD 41/41-45 D | 4,00 kN |
WBD 41/52 D | 4,00 kN |
WBD 41/62 D | 4,00 kN |
WBD 41-75/65 D | 4,00 kN |
WBD 41-75/75 D | 4,00 kN |
Software
This product is available in the following software.
Installation
Normally, two bolts grouped opposite to each other and along the load axis are sufficient. Only in exceptional cases (e.g. tall uprights in frameworks) four bolts are required.
Minimum torque values for the hexagon bolts of the 41 Holding Brackets are:
| Types | Holding Brackets [pcs] | Bolt for Holding Bracket | Accessories | Torque [Nm] |
|---|---|---|---|---|
| 41/21-31 bis 41/41-45 | 1 | M10 | pre-assembled | 40 |
| 41/52 bis 41-75/75 | 2 | M12 | pre-assembled | 60 |
| 41/21 D bis 41/45 D | 1 | M10 | in loose form | 40 |
| 41/52 D bis 41-75/75 D | 1 | M12 | in loose form | 60 |
For ceiling mounting under high loads (up to 7.0 kN), we recommend the use of at least one fully traversing bolt for connecting the channel to the End Support WBD (for examples see "Installation Guideline").
Selection guide for channels:
| Type | Suitable for Sikla Channel |
|---|---|
| 41/21-31 | 41/21/1,5 - 2,0 & 41/31/2,0 |
| 41/41-45 | 41/41/2,0 - 2,5 & 41/45/2,5 |
| 41/52 | 41/52/2,5 |
| 41/62 | 41/62/2,5 |
| 41-75/65 | 41-75/65/3,0 |
| 41-75/75 | 41-75/75/3,0 |
| 41/21 D | 41/21/1,5 - 2,0 D |
| 41/41-45 D | 41/41/2,0 - 2,5 D & 41/45/2,5 D |
| 41/52 D | 41/52/2,5 D |
| 41/62 D | 41/62/2,5 D |
| 41-75/65 D | 41-75/65/3,0 D |
| 41-75/75 D | 41-75/75/3,0 D |
Documents
- Loads - End Support WBD 41-75/75 & 41-75/75 D
PDF (0.21MB)
- Loads - End Support WBD 41-65/75 & 41-65/75 D
PDF (0.20MB)
- Loads - End Support WBD 41/62 & 41/62 D
PDF (0.19MB)
- Loads - End Support WBD 41/52 & 41/52 D
PDF (0.19MB)
- Loads - End Support WBD 41/41-45 & 41/41-45 D
PDF (0.18MB)
- Loads - End Support WBD 41/21-31 & 41/21 D
PDF (0.16MB)