STA F 80/30-Q
End Support STA-Q F 80 HCP
Group: A422
Native connection of the F 80/30 support profile to the F 80 support profile with Self Forming Screw FLS
In combination with Cantilever Bracket and End Support for the consturction of crossbars
Overview of Types
General Information
Plug-in component designed to create an endplate at the open end of a Beam Section TP F 80 or TP F 80/30. A connection to Cantilever brackets AK F 80 or AK F 80/30 can also be realised e.g. for cable trays and downpipes.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
Depending on the situation, different options are recommended:
a) With 2 x 4 Self Forming Screws FLS when used to connect 2 Beam Sections.
b) With 4 Self Forming Screws FLS applied to the insert and two suitable M12 wall anchors/fixings when connected to the building structure.
Documents
- siFramo - ETA-24/0471
PDF (2.15MB)