Clamping Ends SKL
Group: 1350
Mounting element fixed within the flanges of I- and U-shaped beams for systems running parallel or at right angles to the beam
Also suitable as a support for crossbars between two vertically opposed profiles
Overview of Types
General Information
Mounting element to be fixed within the flanges of I- and U-shaped beams. The systems (such as pipes, etc.) supported this way may run parallel or at right angles to the direction of the I or U beam. Also suitable as support for crossbars between two vertically adverse arranged profiles.
Certification
Technical specifications
Material base body | steel |
Material connecting element | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | -VX,perm. | VX,perm. |
SKL | 2,50 kN | 2,50 kN |
The maximal torsional moment of the channel is to be taken into consideration.
Software
This product is available in the following software.
Installation
The tightening moment of the clamping bolts must be between 1 (minimum) and 1 1/2 (maximum) turns; then tighten locking nuts.
Note: The length of the channel to be cut : inside diameter of beam less 25 mm
Suitable for Sikla Channels: 41/41/2.5 and 41/45/2.5