Chilled Water Clamp LKS 32
Group: 1255
Secure prevention of condensation water at the pipe support location of refrigeration and cold-water pipelines
Diffusion-tight connection through secure end-face sealing with commercially available insulation materials.
Recommended up to -0°C at normal ambient condition.
Overview of Types
General Information
Suitable for secure prevention of condensation water at the pipe support location of refrigeration and cold-water pipelines. An optimal diffusion-tight connection with the pipe insulation is easily and safely achieved by fixing usual insulation materials to the clamp faces using adhesive. Recommended up to -0°C at normal ambient condition.
Certification
Technical specifications
Max. temperature | 105 °C |
Min. temperature | -40 °C |
Thermal Conductivity λ {0°C} | λ = 0,024 - 0,026 W/mK |
Thermal Conductivity λ {10°C} | λ = 0,038 W/mK |
Thermal Conductivity λ {40°C} | λ = 0,040 W/mK |
Fire Performance | EL according to DIN EN 13501-1 |
Insertion Isolation | 18 dB(A) |
Bulk Density | 80,00 kg/m³ |
Halogen-free | Yes |
Water vapour diffusion resistance factor | µ 7000 |
Storage Temperature | ≥ 10°C |
Storage Time | 1 year |
Material base body | steel |
Material insulation body | PUR, ALU, EPDM |
Material connecting element | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | -VZ,perm. |
LKS 32- 15 | 0,35 kN |
LKS 32- 18 | 0,45 kN |
LKS 32- 22 | 0,55 kN |
LKS 32- 25 | 0,55 kN |
LKS 32- 28 | 0,60 kN |
LKS 32- 30 | 0,60 kN |
LKS 32- 35 | 0,60 kN |
LKS 32- 38 | 0,60 kN |
LKS 32- 42 | 0,60 kN |
LKS 32- 44 | 0,60 kN |
LKS 32- 48 | 0,60 kN |
LKS 32- 54 | 1,30 kN |
LKS 32- 57 | 1,40 kN |
LKS 32- 60 | 1,50 kN |
LKS 32- 64 | 1,65 kN |
LKS 32- 70 | 1,55 kN |
LKS 32- 76 | 1,70 kN |
LKS 32- 80 | 1,75 kN |
LKS 32- 89 | 1,85 kN |
LKS 32- 108 | 3,35 kN |
LKS 32- 114 | 3,50 kN |
LKS 32- 133 | 3,85 kN |
LKS 32- 139 | 4,00 kN |
LKS 32- 160 | 4,35 kN |
LKS 32- 168 | 4,55 kN |
LKS 32- 219 | 5,55 kN |
LKS 32- 273 | 6,60 kN |
Software
This product is available in the following software.
Installation
The tightening torque is 2 Nm for all sizes.
For types up to 168, the maximum support spans specified in DIN 1988 may be used.
The installation instructions in DIN 4140 must be observed (any gaps must be sealed).
| Type | Nominal thickness [mm] | Size | Length PUR element [mm] |
|---|---|---|---|
| LKS 32 | 32 | 15 - 70 | 50 |
| LKS 32 | 32 | 76 - 273 | 100 |