Block PB 41
Group: 1308
Quick-installation element for mounting pipe clamps and components to all Sikla Channels
Pre-assembled block saves time and is self-supporting in vertical channels
Compatible with Pressix Rods PNS, Grub Screws, Bolts and other threaded elements
Overview of Types
General Information
By using the collar drill, a sufficiently deep, compliant and uniform borehole depth is achieved.
Certification
Technical specifications
Material base body | steel |
Material insulation body | steel |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | VX,perm. | -VZ,perm. |
PB 41 M 8 | - | 5,80 kN |
PB 41 M10 | 2,50 kN | 9,30 kN |
PB 41 M12 | 3,00 kN | 10,00 kN |
Type | MX,perm. |
PB 41 M 8 | 0,01 kNm |
PB 41 M10 | 0,02 kNm |
PB 41 M12 | 0,03 kNm |
The permissible load is determined by the threaded (grooved) rods used. Also the point carrying capacity of the channel and its torsional moment must not be exceeded. These values can be found in the technical data sheets of the respective products.
The load capacity of the connecting parts used is to be considered. This applies particularly under stress of fire.
Software
This product is available in the following software.
Installation
Insert the Block into the channel; by turning the Holding Bracket by 90° to the right, the Channel Nut locks into the stop position; then tighten flange nut or other connecting part - the job is done!
Note: Minimum screwing depth from the lower edge of the Holding Bracket = 20 mm.