Beam Section Holder TPH F100 HCP

Group: A825

Form-fitting, reinforcing bracket for Beam Section TP F 100

Mounting directly to the building structure or directly to the free-standing or concret-embedded profile

Select a Type

Overview of Types
General Information
Installation

Overview of Types

General Information

Interface element to connect 90° intersecting Beam Sections F100. Alternatively the Beam Section Holder TPH may be used to connect only one beam section to an even surface with suitable wall anchors or with cast-in channel accessories.

Certification

Technical specifications

Material base body	steel
Surface	HCP
Corossion class	C4

Load range

Type	-V_X,perm.	V_X,perm.	-V_Y,perm.	V_Y,perm.	-V_Z,perm.	V_Z,perm.
TPH-C F100-F 80 HCP	16,70 kN	16,70 kN	29,10 kN	29,10 kN	18,80 kN	18,80 kN
TPH-C F100 HCP	16,70 kN	16,70 kN	29,10 kN	29,10 kN	18,80 kN	18,80 kN

Type	-M_Y,perm.	M_Y,perm.	-M_Z,perm.	M_Z,perm.
TPH-C F100-F 80 HCP	0,8 kNm	0,80 kNm	0,7 kNm	0,7 kNm
TPH-C F100 HCP	0,8 kNm	0,80 kNm	0,7 kNm	0,7 kNm

The specified load values are permissible loads and contain the partial safety factors γ(M2) = 1,25 (DIN EN 1993-1-8:2010-12, chart 2.1) and γ(G) = 1,35 (DIN EN 1990:2010-12, chart A1.2(B)) for permanent actions.

Also available with DUALSHIELD for high corrosion protection within C5H environments.

Software

This product is available in the following software.

Installation

Connecting one Beam Section F100 90° to another one by using 6 x Self Forming Screw FLS applied through all elongated holes.
Connecting to any other surface or member by using 2 x Self Forming Screws FLS through the two elongated holes on the top of the Beam Section Holder TPH F80 plus 2 appropriate fixing elements up to M12 through the two holes “d1”.