LKA-A 100/160
LKA-A 161/300
LKA-B 100/160
LKA-B 161/300
Beam Connection LKA-A/B HCP
Group: A299
Connecting Assembly Set for attachment to beam sections with a flange width 100-310mm
Basic element for the connection of the Rod Hanger Load Chain Assembly LKV in sizes M10 up to M16 rod and Pipe Clamps type Stabil Form C LK
Overview of Types
General Information
Connecting assembly for the direct attachment of rod hanger assemblies to beam sections with a flange width 100-310mm. The pre-welded Eye-Plate which is fastened to the siFramo80/30 section serves as a basic element for the connection of the Rod Hanger Load Chain Assembly LKV in sizes M10 up to M16 rod and Pipe Clamps type Stabil Form C LK.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | VZ,perm. |
LKA-A 100/160 M 10 HCP | 10,80 kN |
LKA-A 100/160 M 12 HCP | 11,30 kN |
LKA-A 100/160 M 16 HCP | 11,90 kN |
LKA-A 161/300 M 10 HCP | 10,80 kN |
LKA-A 161/300 M 12 HCP | 11,30 kN |
LKA-A 161/300 M 16 HCP | 11,90 kN |
LKA-B 100/160 M 10 HCP | 10,80 kN |
LKA-B 100/160 M 12 HCP | 11,30 kN |
LKA-B 100/160 M 16 HCP | 11,90 kN |
LKA-B 161/300 M 10 HCP | 10,80 kN |
LKA-B 161/300 M 12 HCP | 11,30 kN |
LKA-B 161/300 M 16 HCP | 11,90 kN |
The implementation and construction requirements of the components, their design as well as their verifications and load tests were carried out following the standards VGB R 510 L part I, KTA 3205.3 and DIN EN 13480-3.
Software
This product is available in the following software.
Installation
Connect the Beam Section siFramo 80/30 length with pre-welded siFramo Eye-Plate HP F 80 to the underside of the existing steel beam by means of the U-Holders SB F 80/30-40.
Tightening torque for the U-Holder clamps : 40 Nm
Type A: Load Chain runs crosswise to the beam
Type B: Load Chain runs longitudinally to the beam