Beam Clip SPA 5P M12 A4

Group: 1731

Part number 803802

Universal clamping element for bi-lateral attachment of crossbars for pipe runs, ducts, cable lines and equipment to steel beams

Technical Data

b	13 mm
d	13 mm

Load range

-V_X,perm.	2,50 kN
V_X,perm.	2,50 kN
-V_Z,perm.	11,00 kN
V_Z,perm.	11,00 kN

1) These value refer to the use of a standard stainless steel hexagon screw of strength class 70.

2) These values refer to the worst-case scenario for flange thicknesses of 30 mm (M12) or 40 mm (M16) and a friction coefficient μₛ ≥ 0.2. Any tensile force Fz acting on the flange has not been taken into account.

Technical specifications

Primary element material	Stainless Steel VA
Corrosion protection class	CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2)

Certification

Installation

Position the Beam Clip with the slit side on the component, the lug has to be positioned on the steel girder. Then insert the appropriate hexagon bolt und tighten it with washer and nut.

Tightening torques:

Type	Tightening torque MA [Nm] / plus revolution	Clamping range [mm]
M12	60 / 90°	1 - 30
M16	140 / 90°	4 - 40

For further information on installation, see the document with installation instructions.