TCS 2 M12/M12
Beam Clamp TCS 2 M12/M12 HCP
Group: 1837
Part number 117327
Solid connecting element for mounting pipes, ducts and devices on steel profiles
Combination with Universal Joint enables vertical alignment on inclined beams
Technical Data
B | 25 mm |
H1 | 27.3 mm |
L | 58 mm |
L2 | 29 mm |
Ma | M12 |
Mi1 | M12 |
Mi2 | M12 |
Pre-assembled with clamping bolt and locking nut.
Load range
-VX,perm. | 5,37 kN |
VX,perm. | 5,37 kN |
VY,perm. | 4,51 kN |
-VZ,perm. | 8,50 kN |
The nominal loads indicated apply to new Beam Clamps fixed to undamaged beam flanges only.
Technical specifications
Material base body | cast steel |
Material connecting element | steel |
Surface | HCP |
Corossion class | C4 |
Certification
Approved and accepted by VdS and FM for use with stationary fire extinguishing systems. For different application fields see documents.
Installation
Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting instructions. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tighten the locking nut for securing the installation.
Use an additional Holding Bracket HK 41 for mounting in the aera of the cutting edge of a channel.
Clamping range on parallel flange: 26 mm
Advice: Read relevant mounting instructions before installation!
Documents
- FM Approval - Sikla Beam Clamps TCS
PDF (0.57MB)