TCS 1
Beam Clamp TCS 1 M10/M10
Group: 1337
Part number 116150
Heavy-duty connection element for mounting of pipes, ducts and equipments to steel beams
Vertical alignment even on inclined beams by combining with the Universal Joint
Optimised for Sikla 41 mm mounting rails thanks to the special profile shape at the base – perfect for mounting in the rail slot.
Technical Data
B | 33 mm |
B1 | 21.5 mm |
H1 | 26.2 mm |
L | 44 mm |
L2 | 23 mm |
Ma | M10 |
Mi1 | M10 |
Mi2 | M10 |
Load range
-VX,perm. | 3,11 kN |
VX,perm. | 3,11 kN |
VY,perm. | 1,83 kN |
-VZ,perm. | 5,00 kN |
Technical specifications
Material base body | cast steel |
Material connecting element | steel |
Class | 8.8 |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Certification
Installation
Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting structures. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tighten the locking nut for securing the installation. For installation near a cutting edge of a channel, an additional Holding Bracket HK 41 has to be mounted.
Note: Respect relevant mounting instructions! For FM-construction use thread ≥ M10 only!
Documents
- FM Approval - Sikla Beam Clamps TCS
PDF (0.57MB)
- VdS Approval - Sikla Beam Clamp TCS with Safety Strap - G4800040
PDF (0.32MB)
- VdS Approval - Sikla Beam Clamp TCS 1 - G4800039
PDF (0.29MB)
- VdS Approval - Sikla Beam Clamp TCS 1 M10/M10 - G4820023
PDF (0.84MB)