TCS 2 M12/M12
Beam Clamp TCS 2 M12/M16
Group: 1337
Part number 174215
Solid connection element for secure mounting of pipes, ducts, and devices on steel profiles such as I-beams, T-beams, U-beams, and angle beams.
Flexible alignment even on inclined beams when combined with the universal joint – for vertical installations.
Versatile use as a single fastener or for mounting crossbars and cantilevered structures.
Technical Data
B | 25 mm |
L | 58 mm |
L2 | 29 mm |
H1 | 27.3 mm |
Ma | M12 |
Mi1 | M12 |
Mi2 | M16 |
Load range
-VX,perm. | 5,37 kN |
VX,perm. | 5,37 kN |
VY,perm. | 4,51 kN |
-VZ,perm. | 8,50 kN |
Technical specifications
Material base body | cast steel |
Material connecting element | steel |
Class | 8.8 |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Certification
TCS 0 M8/M8 and TCS 2 M12/M16: Approved and accepted by VdS for use with stationary fire extinguishing systems.
TCS 0 M8/M10 and TCS 2 M12/M12: Approved and accepted by VdS and FM for use with stationary fire extinguishing systems.
For different application fields see documents.
Installation
Tighten the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting structures. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tighten the locking nut for securing the installation.
Note: Respect relevant mounting instructions! For FM-construction use thread ≥ M10 only!