Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
Group: A705
Part number 802790
Modification of siMotec pipe shoes to a double-sided variable axial stop for use with siFramo F 100 profiles
Allows axial movement of the pipe shoe within predefined displacement limits
Restricts movement in both axial directions
B | 160 mm |
LG | 500 mm |
Ma | M12 |
t | 8 mm |
Axial stop VAS F consists of:
1 Fixed point bracket
2 Axial stops
2 Threaded rods M12 x 500
12 Hexagon nuts M12
-VX,perm. | 12,00 kN |
VX,perm. | 12,00 kN |
Load capacities correspond to the values of the fixed point bracket XW F, see documentation in the catalogue. However, maximum axial load is 12 kN per Axial stop.
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
Also available with DualShield for high corrosion protection within C5H environments.
The sliding plate of the pipe shoe is dismantled. The shoe bracket is connected to the beam section F 100 with 4 FLS F self-forming screws. The 500 mm threaded rods are cut to the required length on site. The required amount of axial movement is adjusted using the supplied nuts, with a maximum displacement of 125 mm, equating to half of the sliding plate Forces in the axial direction can only be achieved if anti-slip devices (e.g. cleats/stoppers) are used properly. These must be provided when designing the pipeline and are the responsibility of the pipeline manufacturer.
Certification
