From type 80/120 to 200/220

Axial Stop AS HCP

Group: A705

Modification of siMotec pipe shoes to a single-sided axial stop for use with traditional steel beams

Allows axial movement of the pipe shoe within predefined displacement limits

Restricts movement in one axial direction

Select a Type

Overview of Types
General Information
Installation

Overview of Types

General Information

Modification of Simotec pipe shoes to a single-sided axial stop, for use with traditional steel beams. Using the Axial stop, the pipe shoe can move axially through the pipe to a predefined degree of displacement, with restricted limits in one axial direction.

Certification

Technical specifications

Material base body	steel
Material connecting element	steel
Surface	HCP
Corossion class	C4

Load range

Type	-V_X,perm.	V_X,perm.
AS 80/120 HCP	12,00 kN	12,00 kN
AS 140/180 HCP	12,00 kN	12,00 kN
AS 200/220 HCP	12,00 kN	12,00 kN
AS 240/260 HCP	12,00 kN	12,00 kN
AS 280/300 HCP	12,00 kN	12,00 kN

Load capacities correspond to the values of the fixed point set XS, see documentation in the catalogue. However, maximum axial load is 12 kN per axial stop.

Also available with DUALSHIELD for high corrosion protection within C5H environments.

Software

This product is available in the following software.

Installation

The specified tightening torques must be observed for the connection to the beam. The required amount of axial movement is adjusted using the supplied nuts, with a maximum displacement of 125 mm, equating to half of the sliding plate Forces in the axial direction can only be achieved if anti-slip devices (e.g. cleats/stoppers) are used properly. These must be provided when designing the pipeline and are the responsibility of the pipeline manufacturer.

Max. Beam flange thickness t ≤ 30 mm

Application:

Type	For flange width [mm]
AS 80/120	80 - 120
AS 140/180	121 - 180
AS 200/220	161 - 220
AS 240/260	221 - 260
AS 280/300	261 - 300

Tightenning Torque

Flange Thickness [mm]	Beam Width 80 - 220 mm Tightenning Torque [Nm]	Beam Width 221 - 300 mm Tightenning Torque [Nm]
5 - 10	40	15
11 - 20	25	15
21 - 30	20	15