Axial Stop AS F 80 HCP
Group: A705
Part number 802787
Modification of siMotec pipe shoes to a single-sided axial stop for use with siFramo F 80 profiles
Allows axial movement of the pipe shoe within predefined displacement limits
Restricts movement in one axial direction
Technical Data
B | 11 mm |
LG | 220 mm |
Ma | M12 |
t | 8 mm |
Axial stop AS F consists of:
1 Fixed point bracket
1 Axial stop
2 Threaded rod M12
8 Hexagon nut M12 - 8
Load range
-VX,perm. | 12,00 kN |
VX,perm. | 12,00 kN |
Load capacities correspond to the values of the fixed point bracket XW F, see documentation in the catalogue. However, maximum axial load is 12 kN per Axial stop.
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Certification
Installation
The sliding plate of the pipe shoe is dismantled. The shoe bracket is connected to the beam section F 80 with 4 FLS F self-forming screws. The required amount of axial movement is determined using the supplied nuts, with a maximum displacement of 125 mm, equating to half of the sliding plate. Forces in the axial direction can only be achieved if anti-slip devices (e.g. cleats/stoppers) are used properly. These must be provided when designing the pipeline and are the responsibility of the pipeline manufacturer.