Assembly Set MS 5P A4
Group: 1778
Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section
Overview of Types
General Information
Element for connecting Beam Bracket TKO, Angled Beam Bracket SKO, End Support WBD or Pivot Joint GE F to a beam section.
Technical specifications
Material base body | Stainless Steel A4 |
Corossion class | CRC II – III (C4 – C5 acc. to DIN EN ISO 12944-2) |
Load range
Type | -VY,perm. | VY,perm. | -VZ,perm. | VZ,perm. |
MS 5P M12 S2 A4 | 17,60 kN | 17,60 kN | 8,10 kN | 8,10 kN |
MS 5P M12 S A4 | 17,60 kN | 17,60 kN | 8,10 kN | 8,10 kN |
MS 5P M16 S2 A4 | 19,80 kN | 19,80 kN | 8,40 kN | 8,40 kN |
MS 5P M16 S A4 | 19,80 kN | 19,80 kN | 8,40 kN | 8,40 kN |
The specified F(z) data relate to the worst case with flange thicknesses 30 mnm (M12) or 40 mm (M16) as well as a coefficient of adhesion µ(adhesion) = 0,20.
A possibly operating tensile force F(y) isn't included.
Software
This product is available in the following software.
Installation
1. Position Beam Clip with the split end on beam section.
2. Install support plate and ss trimming and tighten accordingly.
The support plate secures a rectangular assembly of the bolt and prevents its shifting or bending stress. In conjunction with the ss trimming a continuous and predictable preload force is guaranteed.
Tightening torques:
| Type | Size range [mm] | Tightening torque MA [Nm] / plus revolution |
|---|---|---|
| M12 S | 1 - 30 | 60 / 90° |
| M16 S | 4 - 40 | 140 / 90° |