Assembly Group BG54 F100 HCP
Group: 1102
An Assembly Group for the supporting of pipes without complex requirements and without heat insulation on siFramo beam sections. This allows free sliding of the pipe in all directions on the Beam Section TP F 100.
Allows free sliding of the pipe in all directions on Beam Section TP F 100
Overview of Types
General Information
An Assembly Group for the supporting of pipes without complex requirements and without heat insulation on siFramo beam sections. This allows free sliding of the pipe in all directions on the Beam Section TP F 100.
Certification
Technical specifications
Max. temperature | 130 °C |
Min. temperature | -20 °C |
Material base body | steel |
Material sliding element | PA 6.0 |
Surface | HCP |
Corossion class | C4 |
Software
This product is available in the following software.
Installation
According to the anticipated sideways movement of the supported pipes, 1 to 3 U-UB pads should be clicked into the beam section.
|
Number U-UB pad |
Width B [mm] |
Height t [mm] |
|---|---|---|
| 1 | 40 | 5 |
| 2 | 80 | 5 |
| 3 | 120 | 5 |