STA F 80/30-Q
End Support STA-Q F 80 HCP
Group: A422
Native connection of the F 80/30 support profile to the F 80 support profile with Self Forming Screw FLS
In combination with Cantilever Bracket and End Support for the consturction of crossbars
Choose your country
Go to your local Sikla page and discover offers for your country or sales region:
Country
STA F 80/30-Q
Group: A422
Native connection of the F 80/30 support profile to the F 80 support profile with Self Forming Screw FLS
In combination with Cantilever Bracket and End Support for the consturction of crossbars
Depending on the situation, different options are recommended:
a) With 2 x 4 Self Forming Screws FLS when used to connect 2 Beam Sections.
b) With 4 Self Forming Screws FLS applied to the insert and two suitable M12 wall anchors/fixings when connected to the building structure.
Info | Type | Weight | Quantity | Part number | |
| STA-Q F 80/30 HCP | 1.42 kg/pcs. | 1 pcs. | 117294 | ||
Plug-in component designed to create an endplate at the open end of a Beam Section TP F 80 or TP F 80/30. A connection to Cantilever brackets AK F 80 or AK F 80/30 can also be realised e.g. for cable trays and downpipes.
Certification
CE mark (Declaration of performance see downloads)
ETA-24/0471
Primary element material | steel |
Surface finish | HCP |
Corrosion protection class | C4 |
The specified load values are design loads Rd and include a partial safety factor γM2 = 1.25 (DIN EN 1993-1-8:2025-04, Table 4.1)
A partial safety factor of γG = 1.35 (DIN EN 1990:2021-10, Table A1.2(B)) must be taken into account for permanent loads.
Also available with DualShield for high corrosion protection within C5H environments.
Software
This product is available in the following software.
siFramo - ETA-24/0471
PDF (2.15 MB)