Heavy-duty connection elements which, in combination with Grub Screws (M10), are suitable for mounting pipes, ducts and equipment to steel beams (I-, T-, U- and angle steel beams).

  • The combination with a Universal Joint ss provides for vertically aligned attachment to inclined beams.
  • Can serve as single mounting elements, for installing crossbars and for fixing cantilever structures.
  • Due to their special base profile, Beam Clamps TCS 1 can also be slid along and retained in the opening of Sikla Channels MS 41.

Scope of delivery

Pre-assembled with clamping bolt and locking nut.


Tigthen the clamping bolt of the Beam Clamp first by hand, then tighten down with a spanner according to the mounting instructions. The hardened point of the clamping bolt will penetrate the comparatively soft material of the beam, ensuring a solid and highly secure connection. Tigthen the locking nut for securing the installation.
For use in the area of a cutting edge of a channel, an additional Holding Bracket HK 41 must be mounted.

Note: Read relevant mounting instructions before installation!

Technical Data

Working load:
5.0 kN

This nominal load applies to new Beam Clamps fixed to undamaged beam flanges only.

Cast iron, HCP

Approvals / Compliance

Approved and accepted by VdS and FM for use with stationary fire extinguishing systems.
For different application fields: G4820023, G4800039, G4800040, G4800044, G4800045

Beam Clamp TCS1 M10/M10 - G4820023 VdS PDF | 349.3 KB Beam Clamp TCS1 - G4800039 VdS PDF | 155.5 KB Beam Clamp TCS with Safety Strap - G4800040 VdS PDF | 153.4 KB Beam Clamp TCS - Double Support - G4800044 VdS PDF | 134.7 KB Beam Clamp TCS - Projecting Crossbar - G4800045 VdS PDF | 131.8 KB FM - Beam Clamp TCS PDF | 401.3 KB

Clamping range on
parallel flange
TCS 1 M10M10/M10260.2150 162151