Weld-on Eye-Plate HPA HCP
Group: A299
Weld-on Eye Plate for primary steel beams and steel plates
Serves as a base element for connecting Rod Hanger Load Chain Assembly LKV (M10–M16) and Stabil Form C LK pipe clamps
Can also be welded directly to Welding Plates type SPL if required
Overview of Types
General Information
Weld-on Eye Plate to primary steel beam sections and steel plates. The Weld-on Eye-Plate serves as a basic element for the connection of the Rod Hanger Load Chain Assembly LKV in sizes M10 up to M16 rod and Pipe Clamps type Stabil Form C LK. It may also be welded directly to the Welding Plates type SPL if required.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VZ,perm. |
HPA M10-2 HCP | 11,20 kN |
HPA M12-2 HCP | 12,10 kN |
HPA M16-2 HCP | 12,50 kN |
The implementation and construction requirements of the components, their design as well as their verifications and load tests were carried out following the standards VGB R 510 L part I, KTA 3205.3 and DIN EN 13480-3.
Software
This product is available in the following software.
Installation
Align the Weld-on Eye Plate to the primary steel section and weld in place. The weld-on eye plate can be welded directly without prior treatment due to a weldable corrosion-resistant coating (no zinc impurity to weld).
Recommended fillet weld 4mm thick (throat thickness = 4mm)