U Bolt RUB 46 HCP

Group: B112

U Bolt RUB 46 for fastening pipes in utility systems to Profile PRO 46

Used as a fixed point or as a guide for horizontal and vertical pipes

Select a Type

Overview of Types
General Information
Installation

Overview of Types

General Information

U Bolt RUB 46 for fastening pipes in utility systems to the Profile PRO 46. U Bolts are used as a fixed point or as a guide for horizontal and vertical pipes.

Certification

Technical specifications

Halogen-free	Yes
UV-resistant	Yes

Material base body	steel
Material insulation body	PA 6.0
Surface	HCP
Corossion class	C4

Load range

Type	-V_X,perm.	V_X,perm.	-V_Y,perm.	V_Y,perm.	-V_Z,perm.	V_Z,perm.
RUB 46 21,3MM (1/2'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 26,9MM (3/4'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 33,7MM (1'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 42,4MM (1 1/4'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 48,3MM (1 1/2'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 60,3MM (2'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 76,1MM (2 1/2'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 88,9MM (3'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 108MM HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 114MM (4'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 133MM HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 139MM (5'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 159MM HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 168MM (6'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN
RUB 46 219MM (8'') HCP	1,07 kN	1,07 kN	1,04 kN	1,04 kN	5,42 kN	5,42 kN

Software

This product is available in the following software.

Installation

When used as a guide bearing, nuts arranged on both sides at the top and bottom of the round steel bracket must be tightened. The pipe should remain freely movable.
When used as a fixed point, first tighten the lower nuts until the pipe is clamped. Then tighten the upper nuts. For fixed points, the permissible forces of the structural connection and the bending loads of the U Bolt must not be exceeded.