Speed Nut NT CC41 M12

Group: 1314

Part number 182252

Assembly aid for vertical rails or hard-to-reach places – effectively replaces a ‘third hand’.

Can be used universally in all Sikla mounting rails with a rail width of 41 mm – regardless of the rail height.

Smooth movement and secure fastening – no snagging on screw heads, no settling after tightening.

Technical Data
Installation

Technical Data

M_i1

M12

Channel Nut and Spring are tightely connected.

Load range

V_X,perm.	9,00 kN
-V_Z,perm.	10,00 kN

Note: The permissible load capacities of the channels are to be respected.

Technical specifications

Material base body	steel
Material connecting element	Spring steel, stainless
Class	5.6
Surface	electro galvanized (Fe//Zn)
Corossion class	C2

Certification

This product has been awarded the RAL quality mark "pipe supports" and is subject to continuous external monitoring according to RAL GZ-655. Tested load values 'connection design' according to certificate 2010-07/2010-09.

Installation

After inserting the Speed Nut into the channel opening, it is - by exerting slight pressure on it - turned to the right as far as it will go; deinstallation may be effected by following the instructions in reverse order.

Installation and deinstallation do not require tools and may be repeated several times.

	M6	M8	M10	M12	M16
Tightening torque 8.8 [Nm]	10	25	40	80	80

Using lower steel classes, the value are to be reduced accordingly.