Speed Nut NT CC27
Group: 2714
Particularly useful for installation in vertical channels or where access is difficult
Can be used in Sikla Channels MS 27, independent of the channel's height
No obstruction on bolt heads when sliding in and no settlement after tightening
Overview of Types
General Information
In particular useful for installation in vertical channels or where access is difficult. Further advantages: Can be used in the Sikla Channels MS 27, independent of the channel's height. No getting stuck on bolt heads when sliding in the channel. No appearance of settlement after tightening.
Certification
Technical specifications
Material base body | steel |
Material connecting element | Spring steel, stainless |
Class | 5.6 |
Surface | electro galvanized (Fe//Zn) |
Corossion class | C2 |
Load range
Type | -VZ,perm. |
NT CC27-M 6 | 1,50 kN |
NT CC27-M 8 | 1,50 kN |
NT CC27-M10 | 1,50 kN |
Software
This product is available in the following software.
Installation
After inserting the Speed Nut into the channel opening, exert a slight axial pressure. This will cause the nut to turn to the right and engage into the channel. De-installation simply requires the nut to be turned to the left and pulled free. Installation and de-installation do not require tools and may be repeated several times.
Tighten the part to be connected - that's it!