4KT
8KT
Profile Coupling PK F100 HCP
Group: A430
Internal splice connecting element for TP F 100 Beam Section, particularly suitable for vertical extension
For horizontal application, the bending moment must be considered
Overview of Types
General Information
Internal splice connecting element for TP F 100 Beam Section, particularly suitable for vertical extension. Should the component be used for horizontal application, the bending moment needs to be considered.
Certification
Technical specifications
Material base body | steel |
Surface | HCP |
Corossion class | C4 |
Load range
Type | -VX,perm. | VX,perm. |
PK-4KT F100 HCP | 10,00 kN | 10,00 kN |
PK-8KT F100 HCP | 10,00 kN | 10,00 kN |
Type | -MY,perm. | MY,perm. | -MZ,perm. | MZ,perm. |
PK-4KT F100 HCP | 5,09 kNm | 5,09 kNm | 5,09 kNm | 5,09 kNm |
PK-8KT F100 HCP | 3,54 kNm | 3,54 kNm | 3,54 kNm | 3,54 kNm |
Also available with DUALSHIELD for high corrosion protection within C5H environments.
Software
This product is available in the following software.
Installation
To be fastened with 2 x 4 FLS F Self Forming Screws. For optimal bending moment, distance between screws to be as far from each other as possible.
Notice:
Self Forming Screw FLS F to be fastened on two sides with a distance of minimum of 100mm (for type 4kt) / 50 mm (for type 8kt) and to be fastened symmetrically. To optimise the bending moment the FLS F should be installed to maintain the pipe weight of the effective flow - i.e. screws are located top and bottom for horizontal cross bars not sideways.